Download latest official version of MIRA Controller
v1.2606.02
Bug fixes
- Application crashes when turning off WiFi, after having connected to an antenna system
- Fixed potential division-by-zero bug that could cause the application to crash.
- Application could be seen sometimes crashing due to incorrect thread handling.
- Application freezes if I the ethernet cable gets unplugged and then reconnected, while having a measurement ongoing.
v1.2603.18
Bug fixes
- Bug in signal calibration, zero-level gets incorrect on some channels
v1.2603.17
Bug fixes
- You sometimes gets stuck on the plan view
v1.2603.11
Bug fixes
- You have to be windows administrator to create a new project using certain antenna templates
v1.2603.10
Features
- Don’t resend the shooting table to the system, unless it has changed (making the switch over to measurement view faster).
- Support ticket form should attach log files from the system.
- Improved UX in the firmware upgrade procedure (only MIRA Compact and MIRA Flex).
- Improved project template
- Update the max speed indicator to support larger MIRA Flex systems
- More accurate max speed calculation
- Show a warning when the computer is connected to multiple networks using the same sub net
- Update logos and graphics, following the new Guideline Geo branding guidelines.
Bug fixes
- The shooting table view doesn’t get updated after reconnecting to the antenna system
- I’m not allowed to create a project, if it happens to exist a folder with the same name in the projects directory.
- Remove some needless “application areas” from prepare view.
- Power settings flipped values of Max and Power off Voltage after reboot
- Users can start a measurement without selecting a projection, when using TotalStation
- Improved handling of GNSS solutions that sends out duplicated positions (something we’ve seen happening with TotalStation)
- Prompt saying MIRA Controller already open, even though it’s not.
- MIRA Controller crashes if project name contains a colon symbol
- MIRA Controller crashes if port used by websocket server is blocked by Windows
- Instruction texts, on prepare view, missing when having a Flex template
- Include latest VC redistributable in the installation of MIRA Controller
v1.2602.02
Bug fixes
- Total station offset fields (X,Y) don’t accept comma separator.
- Swaths sometimes a bit misplaced in the map.
- Stability issues during measurement with MIRA HDR.
v1.2512.05
Features
- Support for MIRA Flex shooting table (3+ meter wide system).
Bug fixes
- Trig interval not always correctly saved in RAD file.
- Antenna system triggers incorrectly right after that I have made a wheel calibration, unless I change trig interval.
- GNSS offset sometimes shown as 0,0 when using custom antenna template.
v1.2511.05
Bug fixes
- Channel alignment issue when I have picked a number of samples not divisible by 32.
v1.2509.24
Features
- Improvements for firmware upgrade
Bug fixes
- Trig interval changes when moving back and forth between views (caused by custom wheel calibration).
v1.2508.28
Features
- Add the option to turn off rendering of depth slices on the map
Bug fixes
- Incorrect position of traces zero level (visible in the signal calibration view)
- Antenna communication improvements
- Firewall check won’t work if OS langauge is set to Chinese
v1.2506.25
Features
- Add support for the carrier solution “MIRA Compact Tow Hitch Carrier”
- Enable motion trig for all compatible systems
Bug fixes
- Don’t allow less than 1cm trig interval when using encoder (both wheel and motion trig).
- App sometimes crashes on “Advanced settings” view, when loosing connection to the antenna.
- Antenna communication improvements.
v1.2506.25
Features
- Support for antenna systems with more than 8 RX units
Bug fixes
- Upgraded compacts gets the label “Custom” in the footer.
- Diagnostics view broken and operations view missing scroll.
- Improper traces sometimes appear on some channels.
v1.2506.25
Features
- Show antenna name in footer and make it possible to edit prodline and antenna type in operations mode.
- Improved firmware upgrade process for .rev2 (MIRA Compact and MIRA Flex).
- Improved UI elements in the footer of the screen.
- After having made changes to the shooting table I should be able to reset it back to the standard shooting table.
- Make it easier to turn off the demo mode.
- Show in the swath selector when a swath was measured without positioning.
- Warn when having configured a shooting table that isn’t supported by the antenna system.
- Make it possible to choose between white and transparent “system box” on the map.
- The map should start off in the country I’m in.
- Enable RD8 (16bit float) data support.
Bug fixes
- Delete template sometimes makes the user end up in a broken state.
- Delete project sometimes crashes.
- Broken project file causes MIRA Controller to crash on startup.
- Crash when closing MIRA Controller, due to GNSS communication issue.
- Correct the text in the firewall guidance.
v1.2410.30
Bug fixes
- KMZ files not visible in MIRA Controller.